HP OneView for VMware vCenter Installation Guide (7.4)

Table 4 Network connectivity requirement (continued)
SpecificationModules
• HP MSA requires:
Network connectivity to the storage system’s
management port
◦
◦ SMI-S provider must be enabled on the storage
system
To verify, log into the array. Select
Configure→Services→Management to verify that the
SMS Enabled box is selected.
• HP StoreOnce Backup requires:
◦ Network connectivity to the backup system’s
management port
• HP 3PAR Recovery Manager requires the following
network connectivity:
◦ The vCenter server must be accessible from the Local
and the remote RMV servers.
◦ The TCP port used by RMV must be opened in the
firewall. The TCP port- must not be blocked
◦ Proxy must not be set in RMV or the vCenter server.
Setting the proxy in wither RMV or in the vCenter
server can block communication between the vCenter
and RMV.
HP 3PAR RMV Remote Service requires the following
network connectivity:
HP 3PAR RMV Remote Service
• The vCenter server must be accessible from the Local
and the remote RMV servers.
• The TCP port used by RMV must be opened in the
firewall. The TCP port- must not be blocked
• Proxy must not be set in RMV or the vCenter server.
Setting the proxy in wither RMV or in the vCenter server
can block communication between the vCenter and
RMV.
NOTE: For additional StoreFront Module for vCenter requirements, see the HP SPOCK website
at http://www.hp.com/storage/spock. You must sign up for an HP Passport account to gain
access.
HP OneView for vCenter requirements 13