HP Insight Control for VMware vCenter Server User Guide (7.3)

• Array Disk Emulation Type (HP XP P9000 and HP XP arrays only)—LDEV emulation type.
• Replicated—Specifies whether the disk is replicated
• Physical Device Type—The type of device in the CPG (applies only to HP 3PAR StoreServ).
The types can be FC, NL, or SSD.
• Zero Detection—Detect and discard zeros during volume copying (applies only to HP 3PAR
StoreServ)
• Volume ID—Internal volume ID (applies only to HP 3PAR StoreServ)
• Volume Status—Volume health status (applies only to HP 3PAR StoreServ)
• Drive Speed—Physical drive speed (applies only to HP 3PAR StoreServ)
• Creation Time—Source volume creation time (applies only to HP 3PAR StoreServ)
• Expiration Time—Source volume expiration time (applies only to HP 3PAR StoreServ)
• Retention Time—Source volume retention time (applies only to HP 3PAR StoreServ)
• User Space Warning—Alert threshold for a volume's User CPG (applies only to HP 3PAR
StoreServ)
• User Space Limit—Write failure threshold for a volume's User CPG (applies only to HP 3PAR
StoreServ)
• Copy Space Warning—Alert threshold for a volume's Copy CPG (applies only to HP 3PAR
StoreServ)
• Copy Space Limit—Write failure threshold for a volume's Copy CPG (applies only to HP 3PAR
StoreServ)
Viewing virtual disks
The virtual disks page displays the following information:
• Virtual Disk Name—Virtual disk name assigned by VMware
• Virtual Disk Type—Virtual disk type (VMDK or RDM)
• Virtual Machine—Name of the VM associated with the selected VMDK or RDM
• Datastore—Datastore name or the .vmdk name for the RDM
• Provisioned Capacity—Disk capacity visible to a VM using this VMDK or RDM
• Allocated Capacity—Disk capacity reserved by VMware for the VMDK or RDM
For an RDM, this value will match the provisioned capacity value. For a VMDK, this value
might be less than the provisioned capacity value if VMware thin provisioning is used. This
is separate from thin provisioning configured in the storage array.
• VMware Provisioned—Thick or thin
Viewing HBAs
The HBAs page displays the following information:
• Host Names—Host name or cluster host names
• Type—HBA type
• VMware Device Identifier—HBA identifier assigned by VMware
• WWN/IQN—HBA WWN
NOTE: HBA WWN address is not available for HP MSA SAS arrays.
• Label—HBA identifier assigned by VMware
Using the Storage Module for vCenter 71