HP Insight Control for VMware vCenter Server Release Notes 7.2.
© Copyright 2013 Hewlett-Packard Development Company, L.P. Acknowledgements Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Description HP Insight Control for VMware vCenter Server (Insight Control for vCenter) is a single integrated application that you use to manage HP ProLiant servers and/or HP storage systems. The application consists of three modules. The core module is required along with one or two optional components: the Server Module for vCenter and Storage Module for vCenter. Core Module Provides the framework required by the Server Module for vCenter and Storage Module for vCenter.
Supported Windows operating systems • Microsoft Windows Server 2008 (x64) • Microsoft Windows Server 2008 R2 (x64) • Microsoft Windows Server 2012 HP recommends that you install the latest service packs and patches. Supported vCenter Server versions Table 1 vCenter Server support for Insight Control for vCenter 7.2.2 vCenter Server version vSphere Client vSphere Web Client 5.0 Yes Yes 5.0 U1 Yes Yes 5.0 U2 Yes Yes 5.1 Yes Yes 5.1 U1 Yes Yes Enhancements Insight Control for vCenter 7.
HP Insight Control Deployment Wizard If you want to use the HP Insight Control Deployment Wizard, you must: • Install HP RDP, available for download from the HP Insight Rapid Deployment website: http://h18013.www1.hp.com/products/servers/management/rdp.html • Install HP SIM, available for download from the HP Insight Management Media website: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.
User Guide for details about viewing News Feed and Tasks data from an earlier version of Insight Control for vCenter. To facilitate viewing the News Feed and Tasks data, the installer for the earlier version of Insight Control for vCenter should be saved. Contact HP Support for the earlier version of Insight Control for vCenter if necessary. • The Physical NIC labels of some blade servers may be incorrect if the plug-in has not discovered the enclosure's Onboard Administrator.
1. Delete the plug-in present in the path C:\ProgramData\VMware\vSphere Web Client\ vc-packages\vsphere-client-serenity. The plug-in is installed on the system where the vSphere Web Client is running. The ProgramData is a hidden folder. 2. • Restart the VMware vSphere Web Client Service. When HP Insight Control for vCenter is uninstalled, files or folders that are locked by another process are not deleted.
• The network diagram display is incomplete. ◦ When a VM is not accessible by the Hypervisor (such as if the VM is on a datastore which has been detached from the host), the Insight Control for vCenter network diagram is incomplete. Suggested action: Reattach the datastore to the host to get a complete network diagram. ◦ On a configuration with large number of VMs and datastores, it can take a long time for Insight Control for vCenter to draw the network diagram.
This occurs if you do not supply a value in the Gateway or DNS Servers boxes during step 2 of the HP Insight Control Deployment Wizard. Suggested action: Ignore this warning message. After a minute the message vanishes and the installation completes. • Running the HP Insight Control Deployment Wizard on a USB flash drive fails. Suggested action: Install ESX/ESXi on the USB flash drive manually. Insight Control for vCenter does not support deployment on a USB flash drive.
• If the vSphere Client is left idle on the HP Insight Management tab, clicking another link might display the error message This program cannot display the webpage. This issue is seen intermittently. Suggested action: Click the link again to display the page. • HP MSA arrays only: Refresh takes too long. Suggested action: For optimal refresh performance in the GUI, HP recommends using a configuration with 40 or fewer LUNs.
