HP Insight Control for VMware vCenter Release Notes (7.0)

Suggested action: If a configuration has multiple credentials per host, remove the duplicates:
1. From the home page, select HP Insight Management Administration icon.
2. Select Server Password Management from the drop-down menu.
3. Delete all duplicate entries from the database.
4. Click Save.
• Insight Control for vCenter cannot communicate with a node if proxy authentication is required
to reach the node.
Suggested action: Disable the proxy setting to enable Insight Control for vCenter to communicate
with the node.
• The ASR status for servers running the HP CIM Providers is displayed with a white status icon.
Suggested action: The current HP CIM providers do not monitor ASR.
• Software iSCSI storage is not displayed in the Network Diagram.
Suggested action: Use hardware iSCSI HBAs connected through Virtual Connect. iSCSI storage
devices that use software HBAs are not displayed.
• When multiple firmware update jobs are launched from the Smart Component Update tab of the
Firmware link, one or more jobs might not start for a long period of time.
Suggested action: Delete the job and relaunch the job.
• If the vSphere Client is left idle on the HP Insight Software tab, clicking another link might display
the error message This program cannot display the webpage. This issue is seen
intermittently.
Suggested action: Click the link again to display the page.
• MSA2000 G2 and P2000 G3 MSA arrays only: Refresh takes too long.
Suggested action: For optimal refresh performance in the GUI, HP recommends using a
configuration with 40 or fewer LUNs. Configurations with more than 40 LUNs are supported, but
you will experience longer refresh times when viewing LUN information.
• HP P6000 Command View and the MSA2000 G2 SMI-S proxy provider cannot coexist on the
same server.
Suggested action: Install HP P6000 Command View and the MSA2000 G2 SMI-S proxy provider
on separate servers.
• P9500 disk arrays are supported only with the default security option Command Device
Authentication Security Disabled.
• Snapshot and remote replication information is not reported for MSA2000 G2 and P2000 G3
MSA arrays.
• Provisioning on P2000 SAS arrays is supported on ESXi 5.0 and ESX 4.1 only.
• Provisioning on P2000 FC arrays is supported on ESX 4.x and ESXi 5.0 only.
• When you use the storage provisioning features with P6000 EVAs, new datastores and virtual
machines cannot be created on thin-provisioned devices. You can clone an existing virtual machine
that resides on a thin-provisioned device, but the clone will be on a thick-provisioned device.
Documentation feedback
HP is committed to providing documentation that meets your needs. To help us improve the
documentation, send any errors, suggestions, or comments to Documentation Feedback
([e-mail]). Include the document title and part number, version number, or the URL when
submitting your feedback.
Documentation feedback 7