HP Insight Control for VMware vCenter Release Notes (7.0)

Description
Insight Control for vCenter is delivered as a single integrated application. The application consists of
three modules. The core module is required; the Server Module for vCenter and Storage Module for
vCenter are optional components that you select during installation.
Core Module Provides the framework required by the Server Module for vCenter
and Storage Module for vCenter.
Server Module for vCenter Provides server hardware management capabilities, including
comprehensive monitoring, firmware update, ESX/ESXi image
deployment, remote control, Virtual Connect, and power optimization
for HP servers in the VMware environment.
Storage Module for vCenter Provides storage configuration and status information for mapping
VMs, datastores, and hosts to LUNs on HP storage arrays.
Supports provisioning on HP P4000, P2000 G3 MSA, and P6000
EVA storage systems. Supported provisioning tasks include creating,
expanding, or deleting a datastore, and creating or cloning a VM.
Update recommendation
Recommended
Supersedes
6.3.0, 6.3.1
Product models
HP Insight Control for VMware vCenter Server
Devices supported
For device support information, see the following:
HP Insight Control for VMware vCenter Server Installation Guide at http://www.hp.com/go/
icvcenter/docs.
For Server support information, see the HP Insight Software Support Matrix at http://www.hp.com/
go/insightcontrol/docs.
For Storage Module for vCenter storage array and array management software support, see the
HP SPOCK website: http://www.hp.com/storage/spock.
Operating systems
Insight Control for vCenter is supported with the following ESX operating systems:
ESX/ESXi 4.0 (initial release, U1, U2, and U3)
ESX/ESXi 4.1 (initial release and U1)
ESXi 5.0
Insight Control for vCenter is supported on the following operating systems:
Microsoft Windows Server 2003 SP2 (x64)
Microsoft Windows Server 2003 R2 (x64)
Microsoft Windows Server 2008 (x86, x64)
Microsoft Windows Server 2008 R2 (x64)
Description 3