HP Insight Control for VMware vCenter Installation Guide

Table 3 Network connectivity requirements (continued)
SpecificationInsight Control for vCenter module
• HP MSA P2000 G3 requires:
Network connectivity to the storage system’s management port◦
◦ SMI-S provider must be enabled on the storage system
To verify, log into the array. Select
Configure→Services→Management to verify that the SMS Enabled
box is selected.
• HP MSA 2000 G2 requires:
Network connectivity to the storage system’s management port◦
◦ MSA 2000 G2 SMI-S provider must be installed on the HP Insight
Control for vCenter management server
To verify, log into the array. Select
Configure→Services→Management to verify that the SMS Enabled
box is selected.
Also ensure that the Proxy-Provider is running on the HP Insight
Control for vCenter management server.
• HP StoreOnce Backup requires:
◦ Network connectivity to the backup system’s management port
NOTE: For additional Storage Module for vCenter requirements, see the HP SPOCK website at
http://www.hp.com/storage/spock. You must sign up for an HP Passport account to gain access.
12 Installing, upgrading, and removing the software