HP Insight Control for VMware vCenter Installation Guide (7.3)

11. Do one of the following:
If you have an FTP proxy server, select Yes, enter the proxy server name or IP address
and the port number, and then click Next. The installer will verify that it is able to connect
with HP's FTP server via proxy server. For more information on ports, see “Default port
values” (page 29).
If you do not have an FTP proxy server, select No, and then click Next.
12. If the Typical installation option was selected, the Storage Administration Portal Credentials
dialog box opens. Proceed to step 15.
If the Custom installation option was selected, select an installation folder and then click Next.
Use the Choose button to locate the desired folder. You can also click Restore Default Folder
to revert to the default installation folder.
HP recommends that you use the default directory.
The Port Selection dialog box opens.
13. Review the list, change any ports as needed, and then click Next.
NOTE: The installation program verifies that the ports are available. If any of the ports are
not available, you are prompted to change them before continuing.
An Import Data dialog box provides the option to import previously exported data to the
Insight Control for vCenter database.
14. Do one of the following:
If this is a new installation, select No, and then click Next.
If you are reinstalling the application and you want to use previously exported Storage
Module for vCenter data, select Yes, and then click Next. Exported Server Module for
vCenter data can be also be imported from the icvc folder. This applies only to a custom
installation. For a typical installation, the installer will automatically take the default
location for importing the data.
The Import Configuration Data dialog box opens. Click Next to import a file from the
default location.
If the previously exported file is not in the default location (C:\Program Files (x86)\
HP\HP Insight Control for vCenter), click Choose, browse to the folder and
select the .si file you want to use, click OK, and then click Next.
When importing server data , also select the icvc folder.
The Storage Administration Portal Credentials dialog box opens.
18 Installing, upgrading, and removing the software