HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
7
Supported HP 3PAR StoreServ Storage
• HP 3PAR StoreServ 7200/7400
• HP 3PAR StoreServ 10400/10800
Support Fibre Channel Fabric Managers
• Brocade SAN Network Advisor
Hardware Firmware and Fibre Channel Fabric Manager Minimum Requirements
Table 5 shows the minimum firmware requirements needed to successfully import an enclosure. Firmware will be updated
via the appliance to the required versions later in this document.
Table 5. Minimum Firmware/Software Requirements
Onboard Administrator
4.01 or newer
iLO4
1.30 or newer
iLO3
1.61 or newer
Virtual Connect
4.10 or newer
HP 3PAR OS
3.1.3 or newer
Brocade SAN Network Advisor
12.1.4 or later
Table 6. Post Import Firmware Minimum Version
Onboard Administrator
4.01
iLO4
1.40
iLO3
1.70
Virtual Connect
4.20
Note
The Appliance Virtual Machine should not be deployed on a hypervisor within the same enclosure it will manage. Please use
an externally available hypervisor host.
Table 7 shows the HP OneView 1.0, 1.05, and 1.10 Configuration Maximums.
Table 7. Supported Maximums
Total Servers
640
Servers per Enclosure
16
Total Enclosures
40
Total Interconnects
160 / 240
3
Total Enclosure Groups
40
Total Server Profiles
740
Assigned Server Profiles
640
3
New only in the HP Oneview 1.10 Release.