HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide
63
4. After updating the FC Network, examine the Associate with SAN and SAN Manager properties in the General view.
5. Repeat the same steps to update any additional FC Networks.
6. Navigate back to SAN Managers from the Top Level Menu.
7. The Managed SAN Fabrics will now reflect the FC Network name, and Automate Zoning will be enabled.
8. Automate Zoning can be disabled on a per fabric basis. If automated Zoning is not desired, select the Blue Gear icon
next to the fabric,