HP OneView Deployment and Management Guide 1.10

Technical white paper | HP OneView Deployment and Management Guide

2. In the new window, provide the Name, select Fibre Channel as the Network Type, select Fabric Attach as the Fabric Type,

and modify Bandwidth allocation, Uplink Speed, Login Redistribution as needed.

Note

The Fabric Attach Fabric Type is used for traditional Fibre Channel Fabric connectivity, which requires NPIV-capable

upstream FC switches.

Note

By selecting the Fabric Attach Fabric Type, you can assign any of the available X1-X4 ports on a Virtual Connect

FlexFabric module to an FC switch, when creating the Uplink Set in the Logical Interconnect Group.

3. Click the Create button to create the new Ethernet Network and close the Create Network dialog box. You can also

select the Create+ button to continue creating more Networks.

HP 3PAR StoreServ Direct Attach (Optional)

The HP 3PAR StoreServ Flat SAN feature extends Virtual Connects “Wire-Once” management to the FC fabric by reducing

the complexity, and cost of expensive FC switches. This feature is only supported with HP 3PAR StoreServ arrays, and not

with other HP or 3

party storage arrays.

1. From the Top Level Menu, select Networks, then select the +Create Networks button.

First Time

Setup

Configure

Networking

• Create Ethernet

Networks

• Create Fibre Channel

Networks

• (Optional) HP 3PAR

StorServ Direct

Attach

• Network Sets

• Logical Interconnect

Groups

• Enclosure Groups

Discover

Hardware

Upgrade

Firmware

Server

Profiles

Environment

Management

Appliance

Security