HP ProLiant Server Management Pack (v 1.x & 2.3) for Microsoft System Center User Guide

WMI alertWindows event ID
HP Windows (WMI) SCSI storage system fan failed306
HP Windows (WMI) SCSI storage system temperature degraded308
HP Windows (WMI) SCSI storage system temperature failed309
ProLiant Fibre Channel events
WMI alertWindows event ID
HP Windows (WMI) Fibre Channel storage system link down6
HP Windows (WMI) Fibre Channel storage system failed7
ProLiant SATA events
WMI alertWindows event ID
HP Windows (WMI) SATA physical drive failed603
HP Windows (WMI) SATA physical drive degraded604
HP Windows (WMI) SATA physical drive predictive failure605
HP Windows (WMI) SATA physical drive failed613
ProLiant Advanced Server Settings events
NOTE: The Advanced Server Settings is only for ProLiant DL980 G7 (with WMI data source).
WMI alertWindows event ID
HP Windows (WMI) system configuration should be changed for optimal
performance.
8002
HP Windows (WMI) system configuration should be changed for optimal
performance.
8003
HP Windows (WMI) logical processor configuration should be changed for
optimal performance.
8007
HP Windows (WMI) Enable x2APIC mode for optimal system performance.8010
HP Windows (WMI) System Optimization Alert is disabled.8011
HP Windows (WMI) System error has been detected.8012
HP Windows (WMI) system is missing one or more critical QFEs (Quick Fix
Engineering).
8013
HP Windows (WMI) HP Power Regulator mode is not in an optimal setting.8014
HP Windows (WMI) logical processor configuration should be changed for
optimal performance.
8015
HP Windows (WMI) Interrupt redirection mode should be set to physical
destination mode.
8016
76 HP ProLiant servers NT events (WMI)