HP Superdome 2 Partitioning Administrator Guide

c. Select desired LAN, for example, 01.
d. Choose an operating system to install.
5. Finally, the HPUX installation interface appears. Using the Ignite-UX server, install the
necessary bundles. This includes an HP-UX OE, any desired patches, the Quality Pack
bundle, the vPars bundle, and any desired vPars-related bundles.
6. Installing a vPar is similar to installing an nPar. For the next steps on vPars product
installation on HP-UX, see the HP-UX Installation and Update Guide at:
http://www.hp.com/go/hpux-core-docs.
7. To disconnect the DVD drive, use set partition dvd disconnect <vpar>
IMPORTANT: This is a required step to make the DVD drive available for future installations.
For information on using the vPars commands, see the following sections in the chapter Managing
and Booting Virtual Partitions:
• “Managing: Creating a Virtual Partition”.
• “Booting a Virtual Partition”
Bundle Names
You can install vPars on an existing HP-UX installation directly from a depot, DVD, or by using
an Ignite-UX server.
vPars Product Bundles
The vPars bundle name is T1335DC, vPars A.05.07 for HP-UX 11i v3
NOTE: For information on versions, including vPars version, OS versions, and other product
versions required to run with vPars, see the document HP-UX Virtual Partitions Ordering and
Configuration Guide available at:
www.hp.com/go/hpux-vpars-docs
Ignite-UX Cookbook
For information on how to install an Ignite-UX server, install HP-UX using Ignite-UX, and recover
clients from media or over the network, see the document Ignite-UX Administration Guide at:
http://www.hp.com/go/hpux-core-docs.
Removing the vPars Product
To remove the vPars product, execute the swremove command from the target virtual partition.
For example, to remove the vPars product from the partition winona3:
winona3# /usr/sbin/swremove -x autoreboot=true VirtualPartition
The product will be removed, and the virtual partition will be shut down.
CAUTION: Remove the vPars product only at the product level (VirtualPartition). Do
NOT remove the vPars product at the bundle level (T1335DC). Recommended kernel patches
are included in the vPars bundle; if the bundle is removed, these kernel patches will also be
removed. For more information on bundles and patches, see the Patch Management Guide for
HP-UX 11.x at http://docs.hp.com.
96 Installing or Removing the vPars