HP Superdome 2 Partitioning Administrator Guide (5900-2540, December 2012)

UPDATE SHOW FIRMWARE
CLI
• Command:
UPDATE SHOW { FIRMWARE | NPARTITION { nPar name or number | ALL }
}
• Description:
Displays the configured Superdome firmware version. The following Superdome 2 devices
are listed whose installed firmware version differs from the system's configured firmware
version: blade, XFM, SIOX, OA, GPSM.
• Access level/Bay level:
OA Administrator, OA Operator
• Restriction:
You must be connected to the monarch OA.
GUI
To view Firmware Summary information, click the Firmware Summary link.
Figure 36 Firmware Summary
HP Superdome 2 Boot Support
This section provides details of the accessories supported by HP Superdome 2 for booting purposes.
The only supported local disk is fibre channel – P2000 FC G3 array.
• Up to 12 LFF or 24 SFF SAS HDDs per array (SATA is available but not supported)
• Expandable up to 149 HDDs
• Suggest dedicated (per partition) 15K drives in Raid 1 configuration for performance or
availability
72 Booting and resetting Partitions (nPartitions and vPars)