HP Superdome 2 Partitioning Administrator Guide (5900-1801, August 2011)

[Partition]

Par State/ Status* # of # of ILM/ Partition Name

Num RunState Blades IOBays SLM (first 15

(GB)** characters)

=== ======================= ======= ====== ====== ============= ===============

* D-Degraded

** Actual allocated for Active and User requested for Inactive partitions

2. Create an nPartition with one blade and one I/O bay using the following command:

parcreate -P nPar0002 -a blade:1/2:::: -a io:5/1::

Command succeeded

The following output is displayed:

parstatus -P

[Partition]

Par State/ Status* # of # of ILM/ Partition Name

Num RunState Blades IOBays SLM (first 15

(GB)** characters)

=== ======================= ======= ====== ====== ============= ===============

2 Inactive /DOWN OK 1 1 16.0/112.0 nPar0002

* D-Degraded

** Actual allocated for Active and User requested for Inactive partitions

NOTE: The nPartition is created with the default settings for most of the nPartition attributes.

Some of the default settings are:

(i) ILM/SLM ratio - 1:7

(ii) ILM granularity - 1024 MB

(iii) SLM granularity - 1024 MB

(iv) Hyperthreading - Enabled

(v) Defaults assigned for partition identifier and parspec name (1 and ps0001).

For more information on creating nPartitions, see “Creating and configuring nPartitions” (page

38).

Sample procedure for creating nPartitions 37