HP Network Protector SDN Application Administrator Guide

DescriptionComponent
The maximum number of records that are requested in a
single query to the CSD.
stat.limit
The data retention interval (in days) for day-granularity
data in the CSD.
stat.retention.day
The data retention interval (in days) for hour-granularity
data in the CSD.
stat.retention.hour
The data retention interval (in days) for minute-granularity
data in the CSD.
stat.retention.min
Throttle manager
You cannot change the values in the throttle configuration section. These values can be changed
only by the HP support personnel for troubleshooting purposes.
DescriptionComponent
Time interval in millisecond before which the application
comes up after it is disabled. The default value is 300000
milliseconds.
cooldown.interval
Time interval in millisecond before which the application
monitors the transport queue for overflow status.
queue.monitor.interval
The threshold limit for number of times the transport queue
overflow violations can occur.
queue.threshold
Set this value to enable or disable the throttle feature.throttle.disabled
Number of consecutive failures before the throttle is
initiated.
tolerance.threshold
Transport manager
You cannot change the values in the transport manager configuration section. These values can
be changed only by the HP support personnel for troubleshooting purposes.
DescriptionComponent
Intervals in millisecond when the application inspects the
internal queue size.
inspect.queue.size
Number of worker threads for both inspect and audit pools.num.worker.threads
Socket receive buffer size in bytes.socket.receive.buffer
Socket send buffer size in bytes.socket.send.buffer
Descriptions of the configurable components 37