Managing the HP NetStorage 6000 Using Telnet

Managing the HP NetStorage 6000 Using Telnet
6
3. Select Create & init partition. The following appears:
4. Select the partition type for the drive.
5. Press Enter to except the default, for example, sfs2, sfs2ext, sfs2jnl, sfs1, or lvm.
6. Enter the disk volume label and press Enter.
7. Enter the disk volume size and press Enter or press Enter for the default size.
8. Select 7. Proceed with create.
Wait for the message
Initialization OK and Mount OK and press Esc to return to the Configure
Disk menu.
9. When finished, press Esc until your are back at the main menu.
Deleting a Disk Volume
To delete a disk volume:
1. From the Configuration menu, select D. Disks & Volumes.
2. Select the letter next to the drive you want to reconfigure.
3. Select 1. Change/Delete <the volume label name>.
4. Select 8. Delete.
5. Enter the disk volume name and press Enter.
6. Select 7. Proceed with delete.
Wait for the message
Delete OK and Delpart OK and press Esc to return to the Configure Disk
menu.
7. Press Esc until your are back at the main menu.