Desktop Conversion

A.Completely tighten the 3 screws.
B. Insert and tighten 1 additional bracket screw in the front of the unit.
A.Place the side panel over the bracket assembly and push the panel
forward until the back lip is flush with the back of the unit.
B. Using a Phillips screwdriver, use two screws to attach the side panel to
the mounting bracket.
A.Repeat steps 2-5 with the other side of the unit.
*C4483-90100*
C4483-90100
Tighten the Bracket Screws
Attach the Side Panel
Attach the Other Side