Neoview Workload Management Services Guide (R2.5)

3. To retrieve and display the latest system configuration information, use either of these
methods:
• Click the [Refresh] button at the bottom of the right pane.
• Right-click the System name in the tree view, and then select Refresh from the list.
NOTE: You can also perform this task using a WMS command. For more information, see the
“STATUS WMS Command” (page 252) (or “INFO WMS Command” (page 223)).
TIP: To export and save the entire WMS configuration, including the system thresholds and
timeouts, right-click System in the tree view, and then select Export Configuration from the
list. For more information, see “Export and Save the WMS Configuration” (page 65).
Alter the WMS System Configuration
1. Display the WMS system configuration. See “Display the WMS System Configuration”
(page 50).
2. Enter the desired threshold and timeout values. For more information, see “Use the WMS
System Configuration Pane” (page 52).
3. Click the [Apply] button at the bottom of the right pane to save the changes to the WMS
system configuration.
NOTE: You can also perform this task using a WMS command. For more information, see the
“ALTER WMS Command” (page 204).
Configure the WMS System 51