Neoview Command Interface (NCI) Guide (R2.5)

• If you do not specify the name of a data source, the command displays the status of the
NDCS servers for all data sources in the NDCS service. If you specify the name of a data
source, the command displays the status of the NDCS servers for that data source in the
NDCS service.
• The command displays this information for the NDCS servers:
Table C-6 STATUS SERVER Output
DescriptionColumn
Server type, which is 2 for an NDCS serverSRVRTYPE
Port number of the NDCS serverSRVRPORT
Processing node (CPU) number where the NDCS server is runningSRVRNODEID
Process ID assigned to the NDCS serverSRVRPROCESSID
Data source nameDSNAME
Process name of the serverPROCESSNAME
Current state of the NDCS server:
0 = SRVR_UNINITIALIZED
1 = SRVR_STARTING
2 = SRVR_STARTED
3 = SRVR_AVAILABLE
4 = SRVR_CONNECTING
5 = SRVR_CONNECTED
6 = SRVR_DISCONNECTING
7 = SRVR_DISCONNECTED
8 = SRVR_STOPPING
9 = SRVR_STOPPED
10 = SRVR_ABENDED
11 = SRVR_CONNECT_REJECTED
12 = SRVR_CONNECT_FAILED
13 = SRVR_CLIENT_DISAPPEARED
14 = SRVR_ABENDED_WHEN_CONNECTED
15 = SRVR_STATE_FAULT
16 = SRVR_STOP_WHEN_DISCONNECTED
SRVRSTATE
Computer name where the client application is running (or blank if there is
no connection)
COMPUTERNAME
Process ID of the client application connected to the NDCS server (or blank
if there is no connection)
CLIENTPROCESSID
Name of the user connected to the NDCS server (or blank if there is no
connection)
USERNAME
The connected user as identified by the workstation logon name. This field
helps to identify the connected user when several users share the same
Neoview logon name but connect from different workstations.
CLIENTUSERNAME
Name of client application connected to the server (or blank if there is no
connection)
For example: 1272743294
WINDOWTEXT
Integer that uniquely identifies the client-server connection. Use this value
in the STOP SERVER command to stop the NDCS server that has a client
connected to it.
DIALOGID
Date and time (in the client's local time) of the last update of the NDCS server's
state
LASTUPDATEDTIME
For internal use onlySRVRCOMPONENTIDVERSION
For internal use onlySRVRMAJORVERSION
STATUS SERVER Command 179