README for HP Neoview Release 2.4 Service Pack 2

47079
Pipe pipename is found but no data is written to it before
retries=num-retries * tenacity=tenacity-num-seconds. Data must be written
to pipe before computed num-seconds seconds. Modify the retries and/or
the tenacity value in the control file to make Neoview Transporter wait
longer for data to be written
pipename
is the name of the pipe that you specified.
num-retries
is the number of retries that you specified.
tenacity-num-seconds
is the number of seconds that you specified for the tenacity.
num-seconds
is the computed number of seconds.
Cause The pipe exists, but there was no data to read from the pipe before the time period
(retries * tenacity) expired.
Effect The Neoview Transporter Client terminates the job.
Recovery To prevent the Neoview Transporter Client from timing out before data is written
to the pipe, either rerun the job after starting to write to the pipe or increase the values of the
number of retries and/or the tenacity if the current default values do not provide enough time
for data to arrive in the pipe.
49049
Encountered a non-retryable connection error while attempting to connect
to cpu-num (cpu cpu-num).
cpu-num
is the number of the target CPU.
Cause A non-retryable connection failure occurred when trying to establish a connection to
the target CPU on the Neoview platform. For example, the failure occurred upon encountering
an authentication failure or when the specified data source was stopped.
Effect The Neoview Transporter Client terminates.
Recovery Refer to the error details, and then try resolving the issue. If the problem persists
and cannot be resolved, contact HP Support and report this condition.
For More Information
http://www.hp.com/go/neoviewdocsUser Documentation
http://www.hp.com/go/biHP Business Intelligence
Solutions
22