Neoview System Monitor Quick Start (R2.3 SP3, R2.4)

4. Select a color from the palette.
5. Click OK.
6. Click Connect to Server.
Change Advanced Options
This section contains these topics:
• “Change the Standard Deviation Threshold” (page 25)
• “Change the Standard Deviation Bar Color” (page 26)
• “Change the Connection Failure Color” (page 26)
• “Change the Window Setting to “Always on Top”” (page 27)
• “Change the Tooltip Font Size and Contrast” (page 27)
Figure 1-6 (page 25) shows the Advanced Options tab:
Figure 1-6 Advanced Options Tab
Change the Standard Deviation Threshold
If you configured the aggregation options to display Average Segments w/ Standard Deviation,
as described in “Configure Aggregation Options” (page 20), you can set two thresholds for the
standard deviation
• High deviation threshold
• Moderate deviation threshold
If the standard deviation meets or exceeds one of these threshold levels, the associated bar color
changes. These are arbitrary thresholds; you can define the thresholds to any value that you
choose. The low deviation threshold is fixed at 0.
Change Advanced Options 25