Neoview Messages Manual (R2.3)

File-System Error TextError Number
The disk address is out of bounds, or the maximum number of blocks in an alternate-key file is
exceeded.
0023
Privileged mode is required for this operation.0024
AWAITIO[X] or CANCEL attempted on file opened for waited I/O.0025
AWAITIO[X] or CANCEL or CONTROL 22 attempted on a file with no outstanding I/O requests.0026
An operation was attempted with outstanding no-waited I/O requests pending.0027
The number of outstanding non-blocking operations would exceed that specified; an attempt was
made to open a disk file or receiving file with the maximum number of concurrent operations
more than 1; an attempt to ADD more than the configured maximum number of sub devices for
an I/O process; or sync depth exceeds number the opener can handle; or trying to run more than
254 processes from the same program file.
0028
A required parameter is missing in a procedure call, or two mutually exclusive parameters were
supplied.
0029
Message system is unable to obtain memory because either no entry is available in the message
block pool or the maximum number of RECEIVE or SEND message blocks are already in use.
0030
Unable to obtain file-system buffer space.0031
Unable to obtain storage pool space.0032
I/O process is unable to obtain sufficient buffer space.0033
Unable to obtain a file-system control block.0034
Unable to obtain a lock control block, or the transaction or open lock unit limit has been reached.0035
Unable to lock physical memory; not enough memory available.0036
Attempt to perform operation on wrong type of system.0038
The server process received a request with a sync ID older than the set of saved replies.0039
The operation timed out. A command did not complete within the time specified by its
time-limit parameter.
0040
A checksum error occurred on a file synchronization block.0041
Attempt to read from unallocated extent.0042
Unable to obtain disk space for file extent.0043
The disk directory or device control table is full.0044
The file is full; or two entries for process-name were already in the process pair directory.
0045
An invalid key was specified; key length passed to CREATE exceeds 255 bytes; or application
failed to open an alternate-key file.
0046
The alternate key data is not consistent with primary file data.0047
Security violation; illegal operation attempted.0048
Access violation; attempt to use an unexpired labeled tape for output; or a mismatch between a
DEFINE Use attribute (input or output/extend) and the current operation (read or write).
0049
Directory error on a disk.0050
Directory on a disk is marked bad.0051
Error in the disk free space table.0052
File system internal error.0053
I/O error in disk free space table or in Data Access Manager undo area.0054
I/O error in disk directory; the file is no longer accessible.0055
I/O error on disk label; the disk is no longer accessible.0056
The disk free space table is full.0057
The disk free space table is marked bad.0058
482 File-System Errors