README for the HP Neoview UNIX Drivers (Upd6 R2.2)

2. Compile the sample program.
Note: All drivers, other than the 64–bit driver for HP-UX(IA-64) and the x86_64 Linux driver,
are 32-bit drivers; therefore, applications need to be compiled accordingly.
• On Linux:
gcc connect_test.cpp -L/usr/lib -I/usr/include/hpodbc -lhpodbc \
-o connect_test
Note: The Linux driver is a 32-bit driver. If you are using an x86–64 machine, you need
to explicitly compile your appplication as a 32-bit application. For example:
gcc connect_test.cpp -m32 -L/usr/lib \
-I/usr/include/hpodbc -lhpodbc -o connect_test
• On x86_64 Linux:
gcc connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc64 -o connect_test
• On HP-UX (IA-64):
aCC -AA connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -o connect_test -lm
To use cc for compiling and linking:
— Rename connect_test.cpp to connect_test.c.
— Run this command:
cc connect_test.c –I/usr/include/hpodbc –L/usr/lib \
–lstd_v2 -lCsup -lunwind -lm -lhpodbc -o connect_test
• On HP-UX (IA-64) 64 bit:
aCC +DD64 -AA connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc64 -o connect_test -lm
To use cc for compiling and linking:
— Rename connect_test.cpp to connect_test.c
— Run this command:
cc connect_test.c –I/usr/include/hpodbc -L/usr/lib \
-lstd_v2 -lCsup -lunwind -lm -lhpodbc -o connect_test
• On HP-UX (PA-RISC):
aCC -AA connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -lhppa -o connect_test -lm
To use cc for compiling and linking:
— Rename connect_test.cpp to connect_test.c.
— Run this command:
cc connect_test.c –L/usr/lib –I/usr/include/hpodbc \
-lhppa -lstd_v2 -lCsup_v2 -lm -lhpodbc -o connect_test
• On IBM AIX®:
g++ -maix32 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -o connect_test
• On IBM AIX®: 64 bit
g++ -maix64 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
Installation for Neoview Release 2.2 Update 1 51