README for the HP Neoview UNIX Drivers (Upd6 R2.2)

To use cc for compiling and linking:
— Rename connect_test.cpp to connect_test.c
— Run this command:
cc connect_test.c +DD64 –I/usr/include/hpodbc -L/usr/lib/hpux64 \
-lhpodbc64 -lstd_v2 -lCsup -lunwind -lm -lhpodbc -o connect_test
Note: when linking in the pthread library, it should be linked in ahead of -lhpodbc64
• On HP-UX (PA-RISC):
aCC -AA connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -lhppa -o connect_test -lm
To use cc for compiling and linking:
— Rename connect_test.cpp to connect_test.c.
— Run this command:
cc connect_test.c –L/usr/lib –I/usr/include/hpodbc \
-lhppa -lstd_v2 -lCsup_v2 -lm -lhpodbc -o connect_test
Note: when linking in the pthread library, it should be linked in ahead of -lhpodbc.
• On HP-UX (PA-RISC) 64 bit
aCC +DD64 -AA connect_test.cpp -L/usr/lib/pa20_64 -I/usr/nclude/hpodbc \
-lhpodbc64 -o connect_test -lm
To use cc for compiling and linking:
— Rename connect_test.cpp to connect_test.c.
— Run this command:
cc +DD64 connect_test.c –L/usr/lib/pa20_64 –I/usr/include/hpodbc \
-lstd_v2 -lCsup_v2 –lcl lm -lhpodbc64 -o connect_test
Note: when linking in the pthread library, it should be linked in ahead of -lhpodbc64.
• On IBM AIX®:
g++ -maix32 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -o connect_test
or
If the xlc/xlc++ compiled HP ODBC library is installed:
xlc++ -q32 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -o connect_test
• On IBM AIX®: 64 bit
g++ -maix64 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc64 -o connect_test
or
If the xlc/xlc++ compiled HP ODBC library is installed:
xlc++ -q64 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc64 -o connect_test
• On Sun SPARC®:
CC connect_test.cpp -I/usr/include/hpodbc -L/usr/lib \
46