README for the HP Neoview UNIX Drivers (Upd2 R2.2)

-lhpodbc64 -o connect_test -lm
To use cc for compiling and linking:
o Rename connect_test.cpp to connect_test.c.
o Run this command:
cc +DD64 connect_test.c -L/usr/lib/pa20_64 -
I/usr/include/hpodbc \
-lstd_v2 -lCsup_v2 -lcl -lm -lhpodbc64 -o connect_test
Note: When linking in the pthread library, it should be linked in
ahead of -lhpodbc64
o On IBM AIX(R):
g++ -maix32 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -o connect_test
-or-
if the xlc/xlc++ compiled HP ODBC library is installed
xlc++ -q32 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc -o connect_test
o On IBM AIX(R) 64 bit:
g++ -maix64 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc64 -o connect_test
-or-
if the xlc/xlc++ compiled HP ODBC library is installed
xlc++ -q64 connect_test.cpp -L/usr/lib -I/usr/include/hpodbc \
-lhpodbc64 -o connect_test
o On Sun SPARC(R):
CC connect_test.cpp -I/usr/include/hpodbc -L/usr/lib \
-lhpodbc -o connect_test
o On Sun SPARC(R): 64 bit
CC -xarch=v9a connect_test.cpp -I/usr/include/hpodbc -L/usr/lib \
-lhpodbc64 -o connect_test
3. If needed, modify the /etc/hpodbc/MXODSN file.