Neoview Messages Manual (R2.2)

50064
Error in validating field delimiter, value should be between 0x01 and
0x7F.
Cause Invalid delimiter.
Recovery Provide a valid delimiter and resubmit the command.
50065
Failed to create client socket, ERROR: nnn
Cause There was a failure in the creation of the client socket.
Recovery nnn is the error number returned by the socket call. For more information, see
the Linux man page for socket.
50066
Failed to send data to Distributor server. Bytes send is less than or
equal to zero
Cause There was a failure to send the data. The connection was broken.
Recovery Check the TCP/IP connection and make sure that the distributor and repository
servers are running. Retry the operation. If the problem persists, contact the GMCSC.
50067
Failed to send data to Distributor server. Bytes send is less than the
send count.
Cause Some data is missing. The connection was broken.
Recovery Check the TCP/IP connection and make sure that the distributor and repository
servers are running. Retry the operation. If the problem persists, contact the GMCSC.
50068
Failed to receive data from Distributor server. Bytes received is less
than or equal to zero.
Cause The software is unable to receive a response from the distributor.
Recovery Check the TCP/IP connection and make sure that the distributor and repository
servers are running. Retry the operation. If the problem persists, contact the GMCSC.
50069
Message Count Limit is missing.
Cause Message Count Limit is missing.
Effect Cannot process the request.
Recovery Pass the message count limit in CONFIG_TASK_LOAD -m option or provide the
default value in gelserver.config.xml file and resubmit the CONFIG command.
50070
Idle Time Limit is missing.
Cause Idle Time Limit is missing.
Effect Cannot process the request.
Recovery Pass the idle time limit in CONFIG_TASK_LOAD -il option or provide the default
value in gelserver.config.xml file and resubmit the CONFIG command.
Gcmd Messages (50001-50097) 359