Neoview Messages Manual (R2.2)

Recovery Verify the error-logging severity. Valid values are ERROR, WARNING, TRACE,
DEBUG, and INFO. Check whether the error-logging severity default value is specified in
gelserver.config.xml.
50038
Error in validating execution method
Cause Execution method validation failed.
Recovery Verify the execution method. Valid values are PARTITION and CPU. Check
whether the execution method default value is specified in gelserver.config.xml.
50039
Error in validating output type
Effect Output type validation failed.
Recovery Verify the output type. Valid values are TABLE, FILE, QUEUE, SAS, and PIPE.
Check whether the output type default value is specified in gelserver.config.xml.
50040
Error in validating user name
Cause User name validation failed.
Recovery Verify the user name; maximum length is 32 characters.
50041
Error in validating password
Cause Password validation failed.
Recovery Verify the password; maximum length is 32 characters.
50042
Error in validating process priority
Cause Process priority validation failed.
Recovery Verify the process priority. Valid values are HIGH, MEDIUM, and LOW. Check
whether the process priority default value is specified in gelserver.config.xml.
50043
Error in validating data format
Cause Data format validation failed.
Recovery Verify the data format. Valid values are FIXED and DELIMITED. Check whether
the data format default value is specified in gelserver.config.xml.
50044
Error in validating field delimiter
Cause Field delimiter validation failed.
Recovery Verify the field delimiter; maximum length is one character. Check whether the
field delimiter default value is specified in gelserver.config.xml.
50045
Error in validating input type
Effect Input type validation failed.
356 Neoview Loader