Neoview Messages Manual (R2.2)

20106
Failed to de-register one of the servers.
Cause The server failed to de-register one of the services in the repository server (registration
server).
Recovery Contact the GMCSC to check the configuration of the provisioning infrastructure
and that the repository server is running.
20107
SERVERCLASS_SEND_ failed to communicate with server.
Cause SERVERCLASS_SEND_ failed to communicate with the requested server. A detailed
message is appended.
Recovery Contact the GMCSC to check the configuration of the provisioning infrastructure.
20201
Failed to create new socket.
Cause The server failed to create a socket.
Recovery Retry the operation. If the problem persists, contact the GMCSC.
20202
Failed to bind socket to requested port.
Cause The server failed to bind a socket to the port specified in the configuration file
(distributor.config.xml).
Recovery Check that the requested port is available. If the port is not available, specify a
different port in the configuration file (distributor.config.xml) and restart the server.
20203
Failed to accept connection on created socket.
Cause The server failed to accept connections on a socket.
Recovery Retry the operation. If the problem persists, contact the GMCSC.
Neoview Cmserver Messages (30001-32504)
30001
$RECEIVE could not be opened.
Cause The file system failed to open $RECEIVE for the Cmserver process.
Recovery Retry the operation. If the problem persists, contact the GMCSC.
30002
Failed to open Gelserver process file.
Cause Cmserver failed to open the Gelserver process. This error occurs when the Gelserver
process terminates before the Cmserver can open it.
Recovery Retry the operation. If the problem persists, contact the GMCSC for analysis of
accompanying error and warning messages.
30003
Call to FILE_GETRECEIVEINFO_ failed.
Cause A call to file system procedure FILE_GETRECEIVEINFO_ failed.
Neoview Cmserver Messages (30001-32504) 333