NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter User Guide

HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter C-1
C
Specifications
NC7170 Gigabit Server Adapter Specifications
Table C-1: NC7170 Gigabit Server Adapter Specifications
Specification Description
Network Controller Chipset Intel® 82546EB Dual MAC/PHY
Bus Type PCI-X/PCI
Bus Width 32- or 64-bit
Bus Speed (MHz) 33/66/100/133 MHz
Data Transfer Method Bus Master DMA
On-board Memory 128 KB
Power Requirement 1600 mA @ 5V max
Data Transmission Rate 10 Full/10 Half, 100 Full/100 Half, 1000 Full
Standards Supported IEEE 802.3ab, 802.3u, 802.3x , 802.1Q, 802.1p, 802.3ad
(static configuration mode only)
Dimensions 6.6 x 4.8 inches (L x W), 16.5 cm x 12.2 cm (including
bracket)
Connector and Distances 10BASE-T: Category 3, 4 or 5 UTP 100 Meters (328 feet)
100BASE-TX: Category 5 UTP 100 Meters (328 feet)
1000BASE-TX: Category 5 UTP 100 Meters (328 feet)
Interrupts Supported Automatically configured
Temperature Range
Operating: 0°C to 55°C / 32°F to 131°F
Storage: -65°C to 85°C / -85°F to 185°F
continued