HP Surestore NAS 8000 Direct Attach Solution Integration Manual

Installation Guide 33
8. Build the Storage System
Use the information you gathered earlier on the storage planning worksheet to complete the
following tasks. These tasks must be completed before users can access storage:
■
Confirm available space
■
Create LUN(s)
■
Create volume group(s)
■
Create file volumes
■
Assign shared access
Confirm Available Space
1. Select the Storage Tab in Command View NAS to define initial storage system settings.
2. Select Storage Array Summary.
Figure 14 Storage Array Summary
3. Compare the figure in the Unallocated column to the available space on the storage
planning worksheet.
4. Adjust the planned space allocations for LUNs, volume groups, and file volumes on the
storage planning worksheet if necessary.