HP Surestore NAS 8000 SAN Solution Integration Manual

Installation Guide 33
Create Volume Groups
1. Select Volume Groups.
2. Select Actions > Create New Volume Group.
3. Enter a Volume Group Name, then assign space from available LUNs.
Figure 12 Volume Group Settings
Repeat steps 2 and 3 to create additional volume groups.
Create File Volumes
1. Select File Volume Summary.
2. Select Actions > Create New File Volume.
3. Assign a File Volume Name and select Quota Management and Capacity Policy options.
4. Enter the Capacity of the file volume (in GB).
Assign space to the volume using the information from “Storage Planning Worksheet” on
page 11. Remember to leave space for planned snapshots.
Figure 13 File Volume Settings
Repeat steps 2 though 4 to create additional file volumes.