R2511-HP MSR Router Series Voice Configuration Guide(V5)

295
Displaying and maintaining customizable IVR
Task Command Remarks
Display the IVR playing
information.
display voice ivr media-play [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display IVR call information.
display voice ivr call-info [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display IVR media resource
information.
display voice ivr media-source [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Customizable IVR configuration examples
This section provides customizable IVR configuration examples.
Call node configuration example 1: dial terminator match,
normal secondary call
Network requirements
As shown in Figure 91, configure an IVR access number and customize Call node functions on Router B
to meet the following requirements.
• After the subscriber originates a SIP call by dialing 300 (the IVR access number of Router B) from
Telephone A, Router B plays the audio file welcome.wav.
• The subscriber dials 50# at Telephone A to originate a secondary call and then Telephone B1 rings.
• If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
input_error.wav.
• If no number is dialed at Telephone A within the timeout time, Router B plays the audio file
timeout.wav.
Figure 91 Network diagram