R2511-HP MSR Router Series Voice Configuration Guide(V5)

190
----------------------------------------------------------------------1000
1000 online 1.1.1.2:5060
5000 5000 online 2.1.1.1:5060
{ When the IP link recovers, the local SIP server on Router A is disabled, and phones re-register with VCX.
Configuring the call authority control
Network requirements
As shown in Figure 55, the DNs for Department A in a company are 1000 through 1999, while those for
Department B are 5000 through 5999. The following restrictions need to be implemented:
• Phones in Department A and Department B cannot originate external calls.
• Phone 5000 is not allowed to originate calls to phone 1000.
Figure 55 Network diagram
Configuration procedure
1. Configure Router C:
# Configure the router to operate in the alone mode.
<RouterC> system-view
[RouterC] voice-setup
[RouterC-voice] sip-server
[RouterC-voice-server] server-bind ipv4 2.1.1.2
[RouterC-voice-server] server enable
# Configure authentication information for phones.
[RouterC-voice-server] register-user 1000
[RouterC-voice-server-user1000] number 1000
[RouterC-voice-server-user1000] authentication username 1000 password simple 1000
[RouterC-voice-server-user1000] quit
[RouterC-voice-server] register-user 1111
[RouterC-voice-server-user1111] number 1111
[RouterC-voice-server-user1111] authentication username 1111 password simple 1111
[RouterC-voice-server-user1111] quit
[RouterC-voice-server] register-user 5000
[RouterC-voice-server-user5000] number 5000
[RouterC-voice-server-user5000] authentication username 5000 password simple 5000
[RouterC-voice-server-user5000] quit
[RouterC-voice-server] register-user 5555
[RouterC-voice-server-user5555] number 5555