R2511-HP MSR Router Series Voice Configuration Guide(V5)

115
Configuration prerequisites
The required basic configurations have been completed on POTS, VoIP, VoFR, and IVR entities.
Configuration procedure
To configure a maximum-call-connection set:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter voice dial program
view.
dial-program N/A
4. Configure a
maximum-call-connection set.
max-call set-number max-number
By default, no
maximum-call-connection set is
configured.
5. Enter voice entity view.
entity entity-number { pots | ivr |
vofr | voip }
N/A
6. Bind the
maximum-call-connection set
to the current voice entity.
max-call set-number
By default, no
maximum-call-connection set is
bound to a voice entity.
Configuring number substitution
A number substitution rule list defines some number substitution methods, and is used wherever number
substitution is necessary. There is no limitation on where and how many times it is used. Therefore, a
number substitution rule list might be bound globally and bound to different voice entities and subscriber
lines.
The characteristics of global calling/called number substitution or calling/called number substitution on
voice entities and subscriber lines are as follows:
• Global number substitution—The voice gateway substitutes calling and called numbers of all
incoming and outgoing calls according to the number substitution rules configured in dial program
view. Multiple number substitution rule lists can be bound for global calling and called numbers
substitution of incoming and outgoing calls. If there is no match in the first number substitution rule
list, the voice gateway will match against other number substitution rule lists.
• Number substitution on voice entities—The voice gateway substitutes the calling and called
numbers based on the number substitution rule lists bound to voice entities.
• Number substitution on a specific subscriber line—The voice gateway substitutes the calling and
called numbers of incoming calls based on the number substitution rules configured on the
receiving line.
Configuration prerequisites
The required basic configurations have been completed on POTS, VoIP, and VoFR entities.