R2511-HP MSR Router Series Voice Command Reference(V5)

232
trunk
Use trunk to configure a static route entry.
Use undo trunk to delete a static route entry or all static route entries.
Syntax
trunk tag called-number called-pattern ipv4 dest-ip-addr [ port port-number ] [ area-prefix prefix ]
undo trunk { tag | all }
Default
No call route entry is configured.
Views
Call route view
Default command level
2: System level
Parameters
tag: Route entry tag in the range of 0 to 31. Each tag represents a route entry. At most 32 route entries can
be configured.
called-pattern: Called number pattern, consisting of digits and dots (.). Each dot represents a character
and cannot appear before a number. This argument does not support other characters.
ipv4 dest-ip-addr: Destination IPv4 address.
area-prefix prefix: Area prefix to be added to the route entry which an internal user uses to call an
external user, consisting of 1 to 15 digits.
all: Deletes all route entries.
Examples
# Configure a static route entry, the destination address is 192.168.0.80, the called number is 1000, and
the area prefix is 5000.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip-server
[Sysname-voice-server] call-route
[Sysname-voice-server-route] trunk 20 called-number 1000 ipv4 192.168.0.80 area-prefix
5000
trusted-point
Use trusted-point to specify a trusted node.
Use undo trusted-point to delete a trusted node or all trusted nodes.
Syntax
trusted-point ipv4 ipv4-address [ port port-number ]
undo trusted-point { ipv4 ipv4-address | all }
Default
No trusted node is specified.