R2511-HP MSR Router Series Fundamentals Configuration Guide(V5)

83
Managing the device
The following matrix shows the storage media supported on different router models:
Hardware Su
pp
orted stora
g
e media
MSR900
• Flash memory
• USB disk
MSR93X
• Flash memory
• USB disk
MSR20-1X
• Flash memory
• USB disk
MSR20
• CF card
• USB disk
MSR30
• Flash memory (supported by the MSR30-10, MSR30-11E, and MSR30-11F)
• CF card (supported by the MSR30-16, MSR30-20, MSR30-40, and MSR30-60)
• USB disk
MSR50
• Flash memory (not supported by the MPUF)
• CF card
• USB disk
MSR1000
• Flash memory
• USB disk
Overview
Device management includes monitoring the operating status of devices and configuring their running
parameters.
The configuration tasks in this document are order independent. You can perform these tasks in any
order.
Configuring the device name
A device name identifies a device in a network and works as the user view prompt at the CLI. For
example, if the device name is Sysname, the user view prompt is <Sysname>.
To configure the device name:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Configure the device name.
sysname sysname
Optional.
The default device name is HP.