R2511-HP MSR Router Series Fundamentals Configuration Guide(V5)

47
Ste
p
Command Remarks
4. Enable command
authorization.
command authorization
Optional.
By default, command
authorization is disabled. The
commands available for a user
only depend on the user privilege
level.
If command authorization is
enabled, a command is available
only if the user has the
commensurate user privilege level
and is authorized to use the
command by the AAA scheme.
5. Enable command
accounting.
command accounting
Optional.
By default, command accounting
is disabled. The accounting server
does not record the commands
executed by users.
Command accounting allows the
HWTACACS server to record all
executed commands that are
supported by the device,
regardless of the command
execution result. This function
helps control and monitor user
behaviors on the device. If
command accounting is enabled
and command authorization is not
enabled, every executed
command is recorded on the
HWTACACS server. If both
command accounting and
command authorization are
enabled, only the authorized and
executed commands are recorded
on the HWTACACS server.
6. Exit to system view.
quit N/A
7. Apply an AAA authentication
scheme to the intended
domain.
a. Enter the ISP domain view:
domain domain-name
b. Apply the specified AAA
scheme to the domain:
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ] }
c. Exit to system view:
quit
Optional.
By default, local authentication is
used.
For local authentication, configure
local user accounts.
For RADIUS or HWTACACS
authentication, configure the
RADIUS or HWTACACS scheme
on the device and configure
authentication settings (including
the username and password) on
the server.
For more information about AAA
configuration, see Security
Configuration Guide.