R2511-HP MSR Router Series Fundamentals Configuration Guide(V5)

45
Ste
p
Command Remarks
4. Configure common settings
for AUX login.
See "Configuring common settings
for AUX login (
optional)."
Optional.
The next time you attempt to log in through the AUX port, you do not need to provide any username or
password, as shown in Figure 20.
Figure 20 Accessing the
CLI through the AUX port without authentication
Configuring password authentication for AUX login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter one or more AUX user
interface views.
user-interface aux first-number
[ last-number ]
N/A
3. Enable password
authentication.
authentication-mode password N/A
4. Set a password.
set authentication password
{ cipher | simple } password
By default, no password is set.
5. Configure common settings
for AUX login.
See "Configuring common settings
for AUX login (
optional)."
Optional.
The next time you attempt to log in to CLI through the AUX port, you must provide the configured login
password, as shown in Figure 21.