R2511-HP MSR Router Series Fundamentals Configuration Guide(V5)

30
Ste
p
Command Remarks
5. Enable command
accounting.
command accounting
Optional.
By default, command accounting is
disabled. The accounting server
does not record the commands
executed by users.
Command accounting allows the
HWTACACS server to record all
commands executed by users,
regardless of command execution
results. This function helps control
and monitor user behaviors on the
device. If command accounting is
enabled and command
authorization is not enabled, every
executed command is recorded on
the HWTACACS server. If both
command accounting and
command authorization are
enabled, only the authorized and
executed commands are recorded
on the HWTACACS server.
6. Exit to system view.
quit N/A
7. Apply an AAA
authentication scheme to
the intended domain.
a. Enter ISP domain view:
domain domain-name
b. Apply an AAA scheme to
the domain:
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ] }
c. Exit to system view:
quit
Optional.
By default, local authentication is
used.
For local authentication, configure
local user accounts.
For RADIUS or HWTACACS
authentication, configure the
RADIUS or HWTACACS scheme on
the device and configure
authentication settings (including the
username and password) on the
server.
For more information about AAA
configuration, see Security
Configuration Guide.
8. Create a local user and
enter local user view.
local-user user-name N/A
9. Set an authentication
password for the local user.
password { cipher | simple }
password
By default, no password is set.
10. Specifies a command level
of the local user.
authorization-attribute level level
Optional.
By default, the command level is 0.
11. Specify terminal service for
the local user.
service-type terminal
By default, no service type is
specified.
12. Configure common settings
for console login.
See "Configuring common console
user interface s
ettings (optional)."
Optional.