R2511-HP MSR Router Series Fundamentals Configuration Guide(V5)

8
Hotke
y
Function
Esc+P Moves the cursor up one line. This hotkey is available before you press Enter.
Esc+< Moves the cursor to the beginning of the clipboard.
Esc+> Moves the cursor to the ending of the clipboard.
Enabling redisplaying entered-but-not-submitted commands
The redisplay entered-but-not-submitted commands feature enables the system to display what you have
typed (except Yes or No for confirmation) at the CLI when your configuration is interrupted by system
output such as logs. If you have entered nothing, the system does not display the command-line prompt
after the output.
To enable redisplaying entered-but-not-submitted commands:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enable redisplaying
entered-but-not-submitted
commands.
info-center synchronous
By default, this feature is disabled.
For more information about this
command, see Network
Management and Monitoring
Command Reference.
Understanding command-line error messages
When you press Enter to submit a command, the command line interpreter first examines the command
syntax. If the command passes syntax check, the CLI executes the command. If not, the CLI displays an
error message.
Table 4 Common command-line error messages
Error messa
g
e Cause
% Unrecognized command found at '^' position. The keyword in the marked position is invalid.
% Incomplete command found at '^' position.
One or more required keywords or arguments are
missing.
% Ambiguous command found at '^' position.
The entered character sequence matches more than one
command.
Too many parameters
The entered character sequence contains excessive
keywords or arguments.
% Wrong parameter found at '^' position. The argument in the marked position is invalid.