HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

set disk-parameters

Description Selects a global disk Self-Monitoring Analysis and Reporting Technology (SMART) setting. Disks

equipped with this technology can alert the controller of impending disk failures. Changes to the

SMART setting take effect after a rescan or a controller restart.

Syntax

set disk-parameters smart enabled|disabled|on|off|detect-only

Parameters smart enabled|disabled|on|off|detect-only

Enables or disables SMART monitoring for all disks in the storage system. Each disk added after

detect-only is set retains its SMART setting. Enabled by default.

When SMART is enabled, the system checks for SMART events one minute after a restart and every

five minutes thereafter. SMART events are recorded in the event log.

Example Enable SMART:

# set disk-parameters smart on

Success: Command completed successfully