HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

178

show volumecopy-status

Description Shows information about in-progress volume copy operations. While a volume copy is in progress,

the destination volume cannot be accessed.

Syntax

show volumecopy-status [controller a|b]

Parameters controller a|b

Optional. Shows volume copy operations for volumes owned by controller A or B only. If this

parameter is omitted, all volume copy operations are shown.

Output VC Volume Name

Destination volume name

Serial#

Destination volume serial number

Vdisk

Destination vdisk name

Source Volume

Source volume name

Progress

Percent complete of the volume copy

Status

Indicates whether the destination volume is Unavailable or Suspended

Status-Reason

The status is Unavailable while the volume-copy is in progress. The status is Suspended if the

source volume goes offline while the copy is in progress. When the source volume comes back

online, the copy process resumes from the point where it stopped.

Example Show information about volume copies in progress for controller A:

# show volumecopy-status controller a

VC Volume Name Serial Number Vdisk Source Volume Progress Status

Status-Reason

--------------------------------------------------------------------------

MV1-copy SN VD1 MV1 7% Unavailable

VC In Progress

--------------------------------------------------------------------------