HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 167

show snmp-parameters

Description Shows SNMP settings for event notification.

Syntax

show snmp-parameters

Output SNMP

• enabled: SNMP notification is enabled

• disabled: SNMP notification is disabled

To enable or disable requests to the SNMP agent use the set protocols command.

SNMP Filter

• crit: Only critical events are sent as traps

• warn: All critical events and warnings are sent as traps

• info: All events are sent as traps

• none: No events are sent as traps and traps are disabled

SNMP Trap Host IP#

IP address of each trap host

SNMP read community

Community string for read-only access (not shown to Monitor users)

SNMP write community

Community string for write access (not shown to Monitor users)

Example Show SNMP notification settings:

# show snmp-parameters

SNMP: enabled

SNMP Filter: crit

SNMP Trap Host IP1: 172.22.4.171

SNMP Trap Host IP2: 0.0.0.0

SNMP Trap Host IP3: 0.0.0.0

SNMP read community: public

SNMP write community: private