HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

144

Example Show host parameters for a controller with two FC ports:

# show host-parameters

Port Media Target ID Status Speed(A) Speed(C) Topo(C) PID

------------------------------------------------------------------------

A1 FC(L) 207000C0FF000015 OK 2Gb Auto Loop 0

A2 FC(L) 217000C0FF000015 OK 2Gb Auto Loop 1

------------------------------------------------------------------------

Show host parameters for a controller with four SAS ports:

# show host-parameters

Port Media Target ID Status Speed(A) Speed(C) Topo(C) Width

----------------------------------------------------------------------------

A1 SAS 500C0FF000013000 Disconnected 1Gb Direct 4

A2 SAS 500C0FF000013100 Disconnected 1Gb Direct 4

A3 SAS 500C0FF000013200 Disconnected 1Gb Direct 4

A4 SAS 500C0FF000013300 Disconnected 1Gb Direct 4

----------------------------------------------------------------------------

Show host parameters for a controller with two iSCSI ports:

# show host-parameters

Port Media Target ID Status Speed(A) Speed(C)

--------------------------------------------------------------

A1 iSCSI IQN Up 1Gb 1Gb

IP-Ver PIP PIP-Gateway PIP-Netmask MAC

-------------------------------------------------------------

IPv4 10.134.9.40 10.134.0.1 255.255.0.0 00:C0:FF:29:00:24

A2 iSCSI IQN Disconnected 1Gb

IP-Ver PIP PIP-Gateway PIP-Netmask MAC

-------------------------------------------------------------

IPv4 10.134.9.41 10.134.0.1 255.255.0.0 00:C0:FF:29:00:23

------------------------------------------------------------------------------