HP StorageWorks 2300 Family Modular Smart Array CLI reference guide (500912-002, July 2010)

106
set protocols
Description Enables or disables management services and protocols.
Syntax
set protocols
[capi enabled|disabled|on|off]
[debug enabled|disabled|on|off]
[ftp enabled|disabled|on|off]
[http enabled|disabled|on|off]
[https enabled|disabled|on|off]
[service enabled|disabled|on|off]
[ses enabled|disabled|on|off]
[smis enabled|disabled|on|off]
[snmp enabled|disabled|on|off]
[ssh enabled|disabled|on|off]
[telnet enabled|disabled|on|off]
Parameters capi enabled|disabled|on|off
Optional. Enables or disables the in-band CAPI management interface.
debug enabled|disabled|on|off
Optional. Enables or disables the Telnet debug port.
ftp enabled|disabled|on|off
Optional. Enables or disables the expert interface for updating firmware.
http enabled|disabled|on|off
Optional. Enables or disables the standard SMU web server.
https enabled|disabled|on|off
Optional. Enables or disables the secure SMU web server.
service enabled|disabled|on|off
Optional. Enables or disables the Telnet service port.
ses enabled|disabled|on|off
Optional. Enables or disables the in-band SCSI Enclosure Management Services interface.
smis enabled|disabled|on|off
Optional. Enables or disables the Storage Management Initiative Specification interface.
snmp enabled|disabled|on|off
Optional. Enables or disables the Simple Network Management Protocol interface. Disabling this
option disables all SNMP requests to the MIB but still allows SNMP traps to be generated. To
configure SNMP traps use the set snmp-parameters command.
ssh enabled|disabled|on|off
Optional. Enables or disables the secure shell CLI.
telnet enabled|disabled|on|off
Optional. Enables or disables the standard CLI.
Example Disable unsecure HTTP connections and enable FTP:
# set protocols http disabled ftp enabled
Success: Command completed successfully.
See also • show protocols