HP MSA 2040 CLI Reference Guide
create volume-set 73
Create ten 20-GB volumes with the base name vd1_v in vdisk vd1, mapped starting with LUN 5
with read-only access through port A1, and show the results:
# create volume-set count 10 size 20GB vdisk vd1 basename vd1_v baselun 5
access ro ports a1
Info: The volume was created. (vd1_v0000)
...
Info: The volume was created. (vd1_v0009)
Info: The volume was mapped. (vd1_v0000)
...
Info: The volume was mapped. (vd1_v0009)
Success: Command completed successfully. (2012-01-20 14:26:37)
# show volume-maps
Volume View [Serial Number (
SN
) Name (vd1_v0000) ] Mapping:
Ports LUN Access Host-Port-Identifier Nickname Profile
-----------------------------------------------------------------
A1 5 read-only all other hosts Standard
Volume View [Serial Number (
SN
) Name (vd1_v0001) ] Mapping:
Ports LUN Access Host-Port-Identifier Nickname Profile
-----------------------------------------------------------------
A1 6 read-only all other hosts Standard
...
Volume View [Serial Number (
SN
) Name (vd1_v0009) ] Mapping:
Ports LUN Access Host-Port-Identifier Nickname Profile
-----------------------------------------------------------------
A1 14 read-only all other hosts Standard
Success: Command completed successfully. (2012-01-20 14:26:47)
See also • create volume
• delete volumes
• map volume
• set volume
• show vdisks
• show volume-maps
• show volumes
• unmap volume