HP MSA 2040 CLI Reference Guide

volumes 509
volume-class string • standard: Standard volume, not enabled for snapshots.
• PTSNAP: Snapshot-related volume such as a master volume, snap pool, or
snapshot.
• Proxy: Destination of an in-progress replication from a remote volume,
which when complete will change to type snapshot.
volume-class-
numeric
uint32 Numeric equivalents for volume-class values.
• 0: standard
• 1: PTSNAP
• 3: Proxy
profile-
preference
string Not applicable.
profile-
preference-
numeric
uint32 Not applicable.
snapshot string Shows whether the volume is a snapshot.
volume-
qualifier
string • N/A: Non-replication-specific volume such as a standard volume, master
volume, snapshot, or snap pool.
• RSR: Replication-specific volume, such as a primary volume, secondary
volume, replication snapshot, or replication image.
• RSR (DRM Promoted Secondary): During an actual site failover (not a
test failover), the replication set's primary and secondary volumes are shown
as primary volumes with a primary-volume conflict. This qualifier enables
host-based Storage Replication Adapter (SRA) software to determine which
volume is the failed-over secondary volume for disaster recovery
management (DRM). If both systems are online and the communication link
between them is up, both systems will show similar information. When the
SRA completes a restore-replication or reverse-replication operation, this
volume will be shown with the RSR qualifier.
volume-
qualifier-
numeric
uint32 Numeric equivalents for volume-qualifier values.
• 0: N/A
• 2: RSR
• 6: RSR (DRM Promoted Secondary)
blocks uint64 Unformatted size value in 512-byte blocks.
capabilities string For internal use only.
volume-parent string Parent volume serial number. For example, the serial number of a snapshot’s
master volume.
snap-pool string Snap pool serial number.
replication-set string Replication set serial number.
attributes string Shows whether the volume's disks are single pathed.
virtual-disk-
serial
string Vdisk serial number.
volume-
description
string • For HP-UX, a text value (set in-band by a host application) that identifies the
volume.
• Blank by default.
wwn string
World Wide Name of the volume, used by host-based Storage Replication
Adapter (SRA) software to identify the volume.
Table 97 volumes properties (continued)
Name Type Description