HP MSA 2040 CLI Reference Guide

snmp-parameters 477
snmp-parameters
This basetype is used by show snmp-parameters.
Table 78 snmp-parameters properties
Name Type Description
snmp-enabled string Shows whether the Simple Network Management Protocol (SNMP) interface is
enabled or disabled.
• Disabled: SNMP is disabled. This is the default.
• Enabled: SNMP is enabled.
snmp-enabled-
numeric
uint32 Numeric equivalents for snmp-enabled values.
• 0: Disabled
• 1: Enabled
snmp-filter string Minimum level of events to include for SNMP traps.
• crit: Only critical events are sent as traps.
• error: Error and critical events are sent as traps.
• warn: Warning, error, and critical events are sent as traps.
• info: All events are sent as traps.
• none: No events are sent as traps and traps are disabled. This is the default.
snmp-filter-
numeric
uint32 Numeric equivalents for snmp-filter values.
• 0: none
• 1: info
• 2: error
• 4: warn
• 8: crit
snmp-trap-host-
1
string Trap host IP address.
snmp-trap-host-
2
string Trap host IP address.
snmp-trap-host-
3
string Trap host IP address.
snmp-read-
community
string The community string for read-only access. The value is obscured for users
having only the monitor role and is shown in clear text for users having the
manage role.
snmp-write-
community
string The community string for write access. The value is obscured for users having
only the monitor role and is shown in clear text for users having the manage
role.