HP MSA 2040 CLI Reference Guide

security-communications-protocols 467
snmp-numeric uint32 Numeric equivalents for snmp values.
• 0: Disabled
• 1: Enabled
debug-interface string • Disabled: The Telnet debug port is disabled. This is the default.
• Enabled: The Telnet debug port is enabled. Remote connection is allowed,
through incoming ports only, by HP or HP’s authorized representatives for
troubleshooting. Disabling the service debug protocol removes this access.
debug-
interface-
numeric
uint32 Numeric equivalents for debug-interface values.
• 0: Disabled
• 1: Enabled
inband-ses string • Disabled: The in-band SES interface is disabled.
• Enabled: The in-band SES interface is enabled. This is the default.
inband-ses-
numeric
uint32 Numeric equivalents for inband-ses values.
• 0: Disabled
• 1: Enabled
activity-
progress
string • Enabled: Access to the activity progress interface via HTTP port 8081 is
enabled. This mechanism reports whether a firmware update or partner
firmware update operation is active and shows the progress through each
step of the operation. In addition, when the update operation completes,
status is presented indicating either the successful completion, or an error
indication if the operation failed.
• Disabled: Access to the activity progress interface via HTTP port 8081 is
disabled. This is the default.
activity-
progress-
numeric
uint32 Numeric equivalents for activity-progress values.
• 0: Disabled
• 1: Enabled
Table 70 security-communications-protocols properties (continued)
Name Type Description