HP MSA 2040 CLI Reference Guide

428 XML API basetype properties
iscsi-port
This basetype is used by show ports and show host-parametersfor an iSCSI host port.
Table 44 iscsi-port properties
Name Type Description
ip-version string iSCSI IP version.
• IPv4: iSCSI host port addresses use IPv4 format. This is the default.
• IPv6: iSCSI host port addresses use IPv6 format.
ip-address string Assigned port IP address.
gateway string For IPv4, gateway IP address for assigned IP address.
netmask string For IPv4, subnet mask for assigned IP address.
default-router string For IPv6, default router for the assigned IP address.
link-local-
address
string For IPv6, the link-local address that is automatically generated from the MAC
address and assigned to the port.
mac-address string Unique Media Access Control (MAC) hardware address, also called the
physical address.
sfp-status string SFP status:
• OK
• Not present: No SFP is inserted in this port.
• Not compatible: The SFP in this port is not qualified for use in this
system. When this condition is detected, event 464 is logged.
• Incorrect protocol: The SFP protocol does not match the port
protocol. When this condition is detected, event 464 is logged.
sfp-present string Shows whether the port contains an SFP.
• Not Present
• Present
sfp-present-
numeric
uint32 Numeric equivalents for sfp-present values.
• 0: Not Present
• 1: Present
sfp-vendor string The SFP vendor.
sfp-part-number string The SFP part number.
sfp-revision string The SFP revision.
sfp-10G-
compliance
string The SFP’s 10G compliance code, if supported, or No Support.
sfp-ethernet-
compliance
string The SFP’s Ethernet compliance code, if supported, or No Support.
sfp-cable-
technology
string Shows whether the SFP supports active or passive cable technology.
sfp-cable-
length
uint8 The link length (in meters) that is supported by the SFP while operating in
compliance with applicable standards for the cable type.